Doosan 300LC 2007 Serial Number P30L 2693, $50,000

Machine is in use and under power.

IMG_3339.JPEG
IMG_3340.JPEG
IMG_3341.JPEG
IMG_3342.JPEG
IMG_3346.JPEG
IMG_3369.JPEG
 

  • Amco Manufacturing Lathe for Sale $50,000CDN

  • Make/Model Doosan 300LC

  • Year of Manufacture 2007

  • Serial No P30L 2693

  • Control Fanuc 21iTB

  • Chuck 12" 3 Jaw Samchully Powergrip HH212

  • Built in tailstock bearings (allows use of live or dead center)

  • Fanuc Tool Load Monitoring System

  • Automatic Tool Setter

  • HOURS

  • Power On hrs 23,162, Operating Time hrs 468, Cutting Time hrs 1,436

  • CAPACITY

  • Distance between centers 52.8”, Swing over bed in 23.2”, Swing over carriage in 17.7”

  • HEADSTOCK

  • Spindle speed rpm 28-2800, Spindle nose, A2-11 Spindle bore 4.53”, Draw tube ID 4.05”, Max. Turning torque 884 ft lbs

  • SADDLE

  • X axis travel in 11.1”, Z axis travel in 52.4”, Angle of slant bed degrees 45, X/Z Axis guideway span in 12.6”/15”, Tailstock guideway span in 10.4”, Rapid travel Z-axis 945ipm, Rapid travel X-axis 630ipm, Feed force X axis 2710lbs, Feed force Z axis 3980, Ball screw X-axis diameter 1.3”, Ball screw Z-axis diameter 1.6”, X axis repeatability 0.00006”, Z axis repeatability 0.00008”

  • TAILSTOCK

  • Tailstock spindle taper MT 4 Tailstock quill diameter 3.9”, Tailstock quill stroke 3.9”, Tailstock quill thrust/hydraulic pressure 2680lbs@580psi, Hydraulic/ Way Lube Hydraulic tank capacity 3 gallons, Hydraulic oil required Mobil DTE 24 or Shell Tellus 32 Way lubrication tank capacity gal 0.5 Way lubrication oil required Mobil Vactra #2 or Shell Tonna T68

  • TURRET

  • Number of tools 10, Turning tool shank size 1.00”, Boring bar diameter 2.00”

  • COOLANT PUMP

  • Coolant pump pressure 65psi, Coolant pump motor 1.2HP, Coolant Tank capacity 50 gallons

  • GENERAL DIMENSIONS

  • Floor space (length x width) 162” x 75”, Weight 15545lbs, Voltage required 205-235volts, 3 phase, Power requirement amps 119 @ 220 volts