• Make/Model TUR630AMN-2000

• Year of Manufacture 2006

• Serial No 060548 Control Siemens Sinumerik 840D sl ShopTurn

• Chuck 16” 3 Jaw Steel Bison 435-367 2pc Jaws

• Tool Post Quick Change Tool Post

CAPACITY

• Distance between centres 2000 mm

• Swing over bed 630 mm

• Swing over saddle 370 mm Max.

• Weight between centers (without Steadies) 2000 kg Max.

• Weight in chuck only 600 kg

HEADSTOCK

• Number of spindle ranges 2

• Top spindle speed ranges l:2-430,ll:200-1850 rpm

• Spindle nose (DIN 55029) 2 X D 1-11 camlock

• Spindle inner taper 150 mm

• Spindle bore 140 mm

• Main drive moter power 18,5 kW Max.

• Turning torque 2800 Nm Front bearing 250 mm

SADDLE

• Cross slide travel X-axis 390 mm

• Rapid travel Z-axis 8 m/min

• Rapid travel X-axis 8 m/min

• Feed force transverse 10 KN

• Feed force longitudinal 15 KN

• Ball screw Z-axis 40 mm

• Ball screw X-axis 32 mm

• Carriage length bearing on bedways 610 mm

• Width of cross slideways 230 mm

• QC Toolpost Type Multifix c size

TAILSTOCK

• Socket in tailstock spindle 5 MT

• Tailstock spindle diameter 90 OR 100 mm

• Tailstock spindle travel-manual: 200 mm

MOTORS ON THE MACHINE TOOL

• Main drive motor rating at Nn = 1000 rpm/min :

• S1 12 kW

• S6-60% 15 kW

• S6-40% 18.5 kW

• Feed drive motor in X axis:

• rated torque = 13,3 Nm

• rated speed Nn = 3000 rpm

• Feed drive motor in Z axis:

• rated torque = 13,3 Nm

• rated speed Nn = 3000 rpm

COOLANT PUMP

• Motor Power 0.09 kW

• Motor Speed 1350 rpm

• Max Pressure 40 kPa

• Max Volume 0.42 l/s

• Coolant Tank Volume 120

• GENERAL DIMENSIONS

• Width of bed 433 mm

Total Length of Machine 5190 mm

• Width of Machine 2300 mm

• Height of Machine 1760 mm

• Weight of Machine 5350 kg

ACESSORIES INCLUDED

• 2PC OD toolholders 1" square capacity

• 1PC Steady Rest 0-6.25"

• 1PC Steady Rest 6.25-15.1” capacity